Skip to content
Mewtwo
5

Gemi Grade Report

Mewtwo

Base Set

Gemi 575% confidence
Base Set10Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 25, 2026

Card Info

Set
base1
Number
10
Illustrator
Ken Sugimori

Grading Summary

Confidence
75%

Centering and corners are strong, but the front holo scratches and repeated edge wear prevent a top-tier overall impression. The card presents as well-centered with clean corners, but with clearly visible surface and edge wear.

Flags

Image Quality

Glare

Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

minor

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
9.0

Measured centering is very strong overall: the front is essentially perfectly left/right centered, and the back is also near even. The front shows a mild top/bottom imbalance, but it remains in the range of high-quality centering.

Corners
9.0

Corners are largely clean, with only a small white break noted at the back bottom-left corner area. That isolated minor corner wear supports a near-top corner result despite otherwise sharp corners.

Observed

Edges
6.0

Edge condition is held back by multiple small nicks and whitening breaks, most noticeably along the back bottom edge, plus a small chip on the front bottom cut edge. The wear is light to moderate in individual spots but repeated enough to clearly affect the edge grade.

Observed

Surface
5.0

The surface is reduced by several holo-background scratches on the front, led by a longer vertical scratch in the upper-right area and multiple shorter scratches across the left and lower-right portions. The defects are mainly scratch-based rather than dents or creases, but their number and visibility materially affect the surface result.

Observed

What's holding this card back

Lowest axis

Surface (5.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Surface Scratch (moderate, front).

Bringing surface up to the level of the next-weakest axis (Edges, 6.0) would be the single biggest improvement available.

Centering

Front

L50.0
50.0R
T43.0
57.0B

Back

L48.5
51.5R
T50.0
50.0B

Certificate

GemiScan

Verified

Public

Mewtwo

base1 · 10

5
Gemi 5
Centering9.0
Corners9.0
Edges6.0
Surface5.0
F610RT46H