Gemi Grade Report
Base Set
Published August 24, 2026
This Mewtwo shows strong centering and generally solid edges, but the card is held back by noticeable corner wear and especially heavy surface defects. The holo scratches, scattered spots, and faint print line are the dominant factors in the overall appearance.
Image Quality
1 back-side defect ignored due to scan quality.
Grade Shape
Four-axis score profile
Front centering is slightly left-heavy and a bit low, but the back is essentially balanced, so the overall alignment remains strong. The measured offsets support an excellent centering result despite the front-side shift.
Corner wear is visible on the front lower-left corner and, to a lesser extent, the top-left corner, with additional light wear on the back top-left, bottom-left, and a subtle indication at the top-right. The back bottom-right corner showed clearer wear, but that area was excluded from scoring because the image quality there was affected, so the result is based on the remaining reliable corner evidence.
Observed
The edge strip scans show a few small nicks and whitening points on both sides, including a more noticeable chip on the front left and a minor whitening mark on the back. The wear is present but limited and localized, consistent with a solid edge result rather than broad deterioration.
Observed
Surface condition is the main weakness: the front holo background has several diagonal scratches of moderate visibility, plus a couple of lighter scratches, while the back shows multiple small spots and a faint vertical print line through the center. Those combined marks materially affect the surface despite the rest of the card remaining reasonably clean.
Observed
Surface (2.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Surface Scratch (moderate, front).
Bringing surface up to the level of the next-weakest axis (Corners, 7.0) would be the single biggest improvement available.
Verified
Mewtwo
base1 · 10