Gemi Grade Report
Alolan Exeggutor V
SWSH Black Star Promos
Published September 13, 2026
Card Info
- Set
- swshp
- Number
- SWSH225
Grading Summary
This card presents with excellent centering and very clean edges and surface, but moderate corner wear is the main factor limiting overall condition. The front scan glare slightly reduces inspection clarity, yet the visible defects are still limited and localized.
Flags
Image Quality
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
• Strong flash reflection across the right side and center obscures parts of the artwork and some text.
1 front-side defect ignored due to scan quality.
Subgrades
Grade Shape
Four-axis score profile
Centering is very strong left-to-right on both sides, but the card is noticeably shifted vertically toward the bottom on the front and back. That mild top/bottom imbalance keeps it from being perfectly centered while still supporting a high centering result.
The corners show mixed wear: a small chip on the front top-left, light whitening on the back bottom-left, and more noticeable white wear and fraying on the back bottom-right. One front bottom-left mark was present but excluded because the scan quality there was unreliable, and the remaining corner wear supports a mid-high corner result.
Observed
Edge wear is limited to a small whitening nick near the upper-right physical cut edge on the front, while the back edge strip appears clean. That isolated, minor edge wear is consistent with a near-pristine edge result.
Observed
The surface is essentially clean, with only a few tiny specks on the front artwork and lower-right text bar and no meaningful scratches, dents, creases, or print issues. Although glare reduces visibility on part of the front, the observed surface marks are negligible and do not materially affect the surface grade.
Observed
What's holding this card back
Lowest axisCorners (7.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Corner Wear (moderate, back).
Bringing corners up to the level of the next-weakest axis (Centering, 9.0) would be the single biggest improvement available.
Centering
Front
Back
Certificate
Verified
Alolan Exeggutor V
swshp · SWSH225

