Skip to content
Moltres & Zapdos & Articuno GX
9

Gemi Grade Report

Moltres & Zapdos & Articuno GX

SM Black Star Promos

Gemi 975% confidence
SM Black Star PromosSM210Pokémon
1likes
2views
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 22, 2026

Card Info

Set
smp
Number
SM210
Illustrator
HYOGONOSUKE

Grading Summary

Confidence
75%

This card presents very strongly overall, with pristine corners, excellent centering, and only minor edge wear plus a tiny back surface speck. The back scan glare reduced inspection clarity a bit, but not enough to undermine the overall high-quality assessment.

Flags

Image Quality

Glare

Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

minor

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

The card shows excellent centering overall, with the front reading perfectly balanced left-to-right and only a mild top/bottom shift, while the back is also close to even with a slightly heavier bottom and a small left/right offset. Those measurements fit a top-tier centering result.

Corners
10.0

No corner wear was detected on either side, so the corners present cleanly and support a pristine result.

Edges
9.0

There are a few minor edge interruptions: a small nick/whitening break on the front right edge and two small white nicks on the back bottom edge. The wear is limited and localized, which is consistent with a strong but not flawless edge grade.

Observed

Surface
10.0

The surface appears essentially clean, with only a tiny isolated speck on the back and no meaningful scratches, dents, creases, or foil wear identified. The back-side glare slightly limited inspection in places, but the observed evidence still supports a near-pristine surface.

Observed

What's holding this card back

Lowest axis

Edges (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Edge Wear (minor, front).

Bringing edges up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L53.3
46.7R
T55.0
45.0B

Back

L52.2
47.8R
T53.4
46.6B

Certificate

GemiScan

Verified

Public

Moltres & Zapdos & Articuno GX

smp · SM210

9
Gemi 9
Centering10.0
Corners10.0
Edges9.0
Surface10.0
GSGT9MH7W