Skip to content
Lapras
9

Gemi Grade Report

Lapras

30th Celebration

Gemi 970% confidence
30th Celebration131Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published October 1, 2026

Card Info

Set
me05.5
Number
131

Grading Summary

Confidence
70%

The card shows excellent overall preservation, with pristine edges and surface and only a minor corner nick affecting the back. Centering measures very well on both sides, supporting a strong overall presentation.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Strong diagonal light reflections run across the holo surface and obscure parts of the card.

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is excellent overall, with near-even left/right balance on both sides and only a slight front top/bottom tilt. That level of placement supports the top-end centering result.

Corners
9.0

The corner result is driven by a small white nick on the back top-right rounded corner, which is consistent with a minor but visible wear point. A second back bottom-left corner nick was observed but excluded from scoring because it fell in an image-quality affected region, so it is noted cautiously rather than used as primary grade evidence.

Observed

Edges
10.0

No edge wear was identified on either edge-strip scan, and the high-scoring result is consistent with clean, intact borders throughout the card.

Surface
10.0

No surface scratches, dents, creases, print lines, spots, or other surface damage were identified in the available scans, which supports the top surface result. Front glare and some back-side inspection limits reduced visibility in places, but no qualifying surface defect was confirmed.

What's holding this card back

Lowest axis

Corners (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Corner Wear (minor, back).

Bringing corners up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L49.0
51.0R
T52.9
47.1B

Back

L50.8
49.2R
T51.4
48.6B

Certificate

GemiScan

Verified

Public

Lapras

me05.5 · 131

9
Gemi 9
Centering10.0
Corners9.0
Edges10.0
Surface10.0
BTVEZ02TH