Skip to content
Hisuian Typhlosion VSTAR
7

Gemi Grade Report

Hisuian Typhlosion VSTAR

Astral Radiance

Gemi 770% confidence
Astral Radiance193Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store
E
@earl

Published September 7, 2026

Card Info

Set
swsh10
Number
193

Grading Summary

Confidence
70%

This card shows excellent centering and clean corners, with edges as the main weakness. Surface is also strong aside from a small back scratch.

Flags

Image Quality

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate
Glare

Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

minor

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is very balanced on both sides: the front is close to 50/50 left-right and slightly top-heavy, while the back also stays near even with only modest drift. That lines up with a top-tier centering result.

Corners
10.0

The corners present clean overall, with the only noted corner wear on the back top-left appearing in an image-quality affected region and therefore not used for scoring. With no other corner defects supported by the scans, the corner result is consistent with a strong grade.

Observed

Edges
7.0

Edge wear is the main limiter here, with small whitening/nicks on the front right and front top edges plus more noticeable whitening and roughness on the back bottom edge near the far right side. Those scattered edge defects support a lower edge result than the other components.

Observed

Surface
9.0

Surface quality is largely clean, but there is a minor thin scratch in the back upper-left background. That isolated scratch is enough to keep the surface below perfect while still remaining very strong overall.

Observed

What's holding this card back

Lowest axis

Edges (7.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Edge Wear (moderate, back).

Bringing edges up to the level of the next-weakest axis (Surface, 9.0) would be the single biggest improvement available.

Centering

Front

L49.1
50.9R
T51.9
48.1B

Back

L46.2
53.8R
T48.0
52.0B

Certificate

GemiScan

Verified

Public

Hisuian Typhlosion VSTAR

swsh10 · 193

7
Gemi 7
Centering10.0
Corners10.0
Edges7.0
Surface9.0
BCQ6QAMZW