Skip to content
Keldeo ex
8

Gemi Grade Report

Keldeo ex

White Flare

Gemi 870% confidence
White Flare167Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store
P
@panta

Published September 11, 2026

Card Info

Set
sv10.5w
Number
167
Illustrator
Yuu Nishida

Grading Summary

Confidence
70%

This card presents with excellent centering and clean corners and surface overall. The main wear is limited to minor edge whitening, with one corner issue visible only in a glare-affected region and excluded from scoring.

Flags

Image Quality

Glare

• Strong light reflection across the lower-right portion of the card obscures some text and surface detail.

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is excellent on both sides, with only slight left/right and top/bottom drift and no meaningful imbalance. The front and back both stay very close to even, supporting a top-tier centering result.

Corners
10.0

The visible corners are largely clean, and the front corners show no notable wear. A back bottom-right corner area does show whitening/exposed core, but that evidence sat in an image-quality-affected region and was excluded from scoring, so the corners still support a pristine result.

Observed

Edges
8.0

Edge wear is the main visible issue here. There is a small chip/whitening on the far right cut edge and a tiny cluster of white nicks along the top edge near the center-right, which is consistent with a modest reduction from perfect edges.

Observed

Surface
10.0

No surface scratches, dents, creases, print lines, spots, or foil wear were detected in the usable scan areas. Although glare limited inspection in parts of the front and back, the assessable surface evidence remains clean enough to support a top surface result.

What's holding this card back

Lowest axis

Edges (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Edge Wear (minor, front).

Bringing edges up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L49.1
50.9R
T46.0
54.0B

Back

L50.7
49.3R
T50.0
50.0B

Certificate

GemiScan

Verified

Public

Keldeo ex

sv10.5w · 167

8
Gemi 8
Centering10.0
Corners10.0
Edges8.0
Surface10.0
7FS0783P6