Gemi Grade Report
Phantom Forces
Published August 1, 2026
This Gengar EX presents well overall, with strong edges and surface but visible corner wear and uneven front centering. The back scan also shows limited reliability in a few regions, so the graded result is based on the clearest confirmed defects.
Image Quality
Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
2 back-side defects ignored due to scan quality.
Grade Shape
Four-axis score profile
Centering is noticeably off on the front, with a clear left/right lean and a much stronger top/bottom shift, while the back is better but still not fully balanced. The measured placement supports a mid-to-good centering result rather than a top-tier one.
The corners show several small perimeter nicks, including a more noticeable white wear spot on the back bottom-left corner and lighter wear on the front bottom-left and back top-right corners. That mix of minor-to-moderate corner wear is enough to pull the corners below near-mint quality.
Observed
Edge condition is mostly strong, with only a small chipped/whitened section on the back bottom edge and no meaningful wear called out on the front. Two additional back edge nicks were observed but were excluded from scoring because they fell in image-quality affected regions, so the assessed edge result is driven by the limited reliable wear that could be verified.
Observed
Surface is largely clean, with only a tiny white speck on the back dark-blue background near the lower-left area. No broader scratching, creasing, dents, or print-line issues were indicated, which supports a strong surface result.
Observed
Corners (6.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Corner Wear (moderate, back).
Bringing corners up to the level of the next-weakest axis (Centering, 7.0) would be the single biggest improvement available.
Verified
Gengar EX
xy4 · 114