Skip to content
Mega Charizard X ex
9

Gemi Grade Report

Mega Charizard X ex

MEP Black Star Promos

Gemi 970% confidence
MEP Black Star Promos023Pokémon
1views
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 18, 2026

Card Info

Set
mep
Number
023

Grading Summary

Confidence
70%

This card shows excellent overall preservation, led by perfect centering and clean surfaces. The main flaws are limited to minor edge wear and one moderate back-corner issue, with an additional back-corner mark excluded from scoring due to image-quality limitations.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Centering is excellent on both sides, with the front measuring about 48/52 left-right and 48/52 top-bottom, and the back close to even in both directions. This supports a perfect centering result.

Corners
9.0

Corners are very strong overall, with no notable front-corner wear and only one clear back-corner issue: moderate whitening and small chips at the back bottom-right corner. A second back top-right corner break was visible but occurred in an image-quality affected region and was excluded from scoring, so the corner result still reflects mostly clean corners with a single localized flaw.

Observed

Edges
9.0

Edges show only light wear, including a small white nick on the front left cut edge and slight whitening/roughness along the back bottom edge. These are minor, localized flaws rather than broader edge deterioration.

Observed

Surface
10.0

No surface scratches, dents, creases, print lines, spots, foil wear, or other surface anomalies were detected on the front or back art scans. The surface therefore presents cleanly.

What's holding this card back

Lowest axis

Corners (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Corner Wear (moderate, back).

Bringing corners up to the level of the next-weakest axis (Edges, 9.0) would be the single biggest improvement available.

Centering

Front

L48.1
51.9R
T47.9
52.1B

Back

L50.7
49.3R
T51.4
48.6B

Certificate

GemiScan

Verified

Public

Mega Charizard X ex

mep · 023

9
Gemi 9
Centering10.0
Corners9.0
Edges9.0
Surface10.0
60HMPGYCD