Skip to content
Mega Zygarde ex
9

Gemi Grade Report

Mega Zygarde ex

Perfect Order

Gemi 975% confidence
Perfect Order104Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 25, 2026

Card Info

Set
me03
Number
104
Illustrator
takuyoa

Grading Summary

Confidence
75%

This card presents very clean overall with strong centering, clean corners, and no meaningful edge wear. The only notable issue is a small front surface scratch in the upper foil area, which keeps the surface just below perfect.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

The measured alignment is very strong overall, with the front showing only slight deviation from center and the back recorded as essentially centered on the horizontal axis. That level of placement supports a top centering grade.

Corners
10.0

No corner wear was detected on either side, and the corners appear clean enough to support a perfect corners result.

Edges
10.0

Both edge-strip scans reported no edge wear, so there is no meaningful edge deterioration to pull the grade down.

Surface
9.0

The surface result is lowered by a minor, short horizontal scratch-like line in the upper central front foil area just below the title band. The defect is localized and light, but it is enough to keep the surface from a perfect score; glare on the front and back also makes the inspection less clean in a few areas.

Observed

What's holding this card back

Lowest axis

Surface (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Surface Scratch (minor, front).

Bringing surface up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L48.2
51.8R
T50.0
50.0B

Back

L50.0
50.0R
T43.0
57.0B

Certificate

GemiScan

Verified

Public

Mega Zygarde ex

me03 · 104

9
Gemi 9
Centering10.0
Corners10.0
Edges10.0
Surface9.0
X6N3J1XR3