Skip to content
Mew ex
7

Gemi Grade Report

Mew ex

30th Celebration

Gemi 775% confidence
30th Celebration158Pokémon
3views
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store
J
@jdad

Published October 2, 2026

Card Info

Set
me05.5
Number
158

Grading Summary

Confidence
75%

Centering is excellent on both sides, with only minor back-side wear and a few small surface marks keeping the card from a flawless overall impression. Corners are the main limitation, while edges remain strong.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is extremely tight on the front and still very solid on the back, matching a top-tier centering result. The scan evidence does not show any meaningful balance issue that would pull this component down.

Corners
7.0

Corner wear is the clear weakness here: the back right corners show visible fraying and a small nick, and the front bottom-right corner has a tiny perimeter break. Those defects are localized but sufficient to explain a moderate reduction in the corners result.

Observed

Edges
10.0

The edges present cleanly overall, with no meaningful edge wear called out on the front strip or art scan. The small back-side marks are surface-related rather than true edge damage, so the edge result is well supported.

Surface
9.0

The surface is mostly clean, with only a faint short scratch along the back bottom border and a tiny pale fleck near the upper back edge. Minor glare on both sides reduces inspection clarity slightly, but the observed marks are limited and consistent with a near-mint surface result.

Observed

What's holding this card back

Lowest axis

Corners (7.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Corner Wear (moderate, back).

Bringing corners up to the level of the next-weakest axis (Surface, 9.0) would be the single biggest improvement available.

Centering

Front

L51.0
49.0R
T50.0
50.0B

Back

L47.0
53.0R
T51.4
48.6B

Certificate

GemiScan

Verified

Public

Mew ex

me05.5 · 158

7
Gemi 7
Centering10.0
Corners7.0
Edges10.0
Surface9.0
TYYZCMWCA