Skip to content
Mega Darkrai ex
9

Gemi Grade Report

Mega Darkrai ex

Pitch Black

Gemi 970% confidence
Pitch Black101Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 7, 2026

Card Info

Set
me05
Number
101

Grading Summary

Confidence
70%

This card shows a very strong overall presentation with clean surfaces and corners, plus only minor edge wear. One back-edge defect was present but excluded from scoring because of scan quality in that region.

Flags

Image Quality

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate
Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is reported as highly balanced, with the front scan essentially even and the back measurements still supporting a well-aligned presentation overall. That level of placement is consistent with the top centering result.

Corners
10.0

No corner wear was detected on either side, so the corners present as clean and sharp. That supports the perfect corners result.

Edges
9.0

The edges show a couple of tiny whitening/nick marks on the front cut edge, indicating only light wear rather than sustained edge damage. One small back-edge nick was observed but excluded from scoring because it fell in an image-quality-affected area, so the edge result is based on the clearly visible minor wear.

Observed

Surface
10.0

No surface scratches, dents, creases, spots, print lines, foil wear, or other surface anomalies were detected in the front or back card art scans. The surface therefore supports a pristine result.

What's holding this card back

Lowest axis

Edges (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Edge Wear (minor, front).

Bringing edges up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L52.0
48.0R
T50.0
50.0B

Back

L52.0
48.0R
T55.8
44.2B

Certificate

GemiScan

Verified

Public

Mega Darkrai ex

me05 · 101

9
Gemi 9
Centering10.0
Corners10.0
Edges9.0
Surface10.0
PS3TNPK6K