Skip to content
Tinkatink
9

Gemi Grade Report

Tinkatink

Paldea Evolved

Gemi 970% confidence
Paldea Evolved216Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 26, 2026

Card Info

Set
sv02
Number
216

Grading Summary

Confidence
70%

This card presents as a strong high-grade candidate, with excellent centering and only light corner and edge wear. The surface remains essentially clean, aside from a tiny back-border speck.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Strong reflective glare from the holo surface creates bright bands across the card, obscuring some details.

Defect Detected In Affected Region

1 back-side defect ignored due to scan quality.

moderate

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

The card is very well centered on both sides, with the front measuring about 53.6/46.4 left-right and 48.1/51.9 top-bottom, and the back staying similarly close to balanced. That level of alignment supports a top centering result.

Corners
9.0

The corners show only light wear, mainly small whitening and slight fraying at the front top-right corner plus a minor white break at the front top-left. The wear is limited and consistent with a high corner grade.

Observed

Edges
9.0

Edge wear is minimal, with a small nick/chip visible along the front right cut edge and a tiny back-side nick near the far right edge that was not used in scoring because that area was affected by image quality. The remaining edges appear largely clean, which fits a strong edge result.

Observed

Surface
10.0

The surface appears clean overall, with only a tiny pale speck/scuff on the back blue border and no meaningful scratches, dents, creases, or print-line issues reported. That level of surface blemish is too minor to move the card off a top surface grade.

Observed

What's holding this card back

Lowest axis

Corners (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Corner Wear (minor, front).

Bringing corners up to the level of the next-weakest axis (Edges, 9.0) would be the single biggest improvement available.

Centering

Front

L53.6
46.4R
T48.1
51.9B

Back

L47.1
52.9R
T51.4
48.6B

Certificate

GemiScan

Verified

Public

Tinkatink

sv02 · 216

9
Gemi 9
Centering10.0
Corners9.0
Edges9.0
Surface10.0
FAMX81G4V