Skip to content
Minun
7

Gemi Grade Report

Minun

Unleashed

Gemi 775% confidence
Unleashed34Pokémon
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published September 24, 2026

Card Info

Set
hgss2
Number
34
Illustrator
Kouki Saitou

Grading Summary

Confidence
75%

This copy shows excellent centering and very clean edges and surface, with the main downgrade coming from light whitening across the corners. Overall, it presents as a strong high-grade card with minor corner wear.

Flags

Image Quality

Glare

• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.

• Strong vertical lighting glare runs through the card face and text, making inspection of surface details unreliable.

Distortion

Low-confidence card geometry detected (confidence 0.68, detected sides 0).

minor

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

The card’s centering is exceptionally tight on both sides, with the front reading about 45.7/54.3 left-right and 47.2/52.8 top-bottom, and the back also landing very close to even. That level of balance supports a top centering result.

Corners
7.0

The corner score is held back by light whitening on all four corners, including a more noticeable touch on the top-right and smaller white nicks or edge breaks at the remaining corners. The wear is minor but present enough across the set of corners to keep this component below the top tier.

Observed

Edges
10.0

The edges appear clean overall, with no meaningful edge wear detected on the front strip scans and no true edge damage called out on the back. The only noted issue is a tiny dark speck on the back blue border, which is a negligible surface mark rather than edge wear and does not materially affect the edge result.

Surface
10.0

Surface quality presents very cleanly overall, with only a tiny dark speck on the back printed border and no scratches, dents, creases, or foil issues reported. Although glare limits some front-side inspection, the available evidence still supports a top surface result because no substantive surface defects were identified.

Observed

What's holding this card back

Lowest axis

Corners (7.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Corner Wear (minor, back).

Bringing corners up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L45.7
54.3R
T47.2
52.8B

Back

L47.7
52.3R
T49.9
50.1B

Certificate

GemiScan

Verified

Public

Minun

hgss2 · 34

7
Gemi 7
Centering10.0
Corners7.0
Edges10.0
Surface10.0
B280M7YB9