Skip to content
Jirachi ex
9

Gemi Grade Report

Jirachi ex

30th Celebration

Gemi 990% confidence
30th Celebration155Pokémon
1views
Compare community scans of this card →

Scanned with GemiScan

Grade your own cards free.

Download on the App Store

Published October 1, 2026

Card Info

Set
me05.5
Number
155

Grading Summary

Confidence
90%

This Jirachi ex shows excellent overall preservation, with near-perfect centering and clean corners and edges. The only visible limitation is light surface spotting/marking, mainly on the printed borders and a small speck on the back art.

Subgrades

Grade Shape

Four-axis score profile

0-10
Centering
10.0

Measured centering is very close to even on both sides, with only a slight lean toward the right and very minor top/bottom variation. That level of balance is consistent with a perfect centering grade.

Corners
10.0

No corner wear was detected on the front or back scans, so the corners present as clean and well-preserved. This matches the top corner score.

Edges
10.0

No edge wear is evident on either side, so the edges support a top score. The small pale marks reported along the printed borders are surface issues, not cut-edge damage.

Surface
9.0

The surface grade is held just below perfect by a few light marks: a short faint vertical mark on the front top border, a tiny pale speck on the front right border, a tiny fleck on the back top border, and a small dark speck in the back art. These are minor but visible surface imperfections, while the rest of the card appears clean.

Observed

What's holding this card back

Lowest axis

Surface (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.

The limiting defect is Surface Mark (minor, front).

Bringing surface up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.

Centering

Front

L46.3
53.7R
T53.1
46.9B

Back

L47.7
52.3R
T51.4
48.6B

Certificate

GemiScan

Verified

Public

Jirachi ex

me05.5 · 155

9
Gemi 9
Centering10.0
Corners10.0
Edges10.0
Surface9.0
7SSF3D82Y