Gemi Grade Report
Sylveon ex
30th Celebration
Scanned with GemiScan
Grade your own cards free.
Published September 26, 2026
Card Info
- Set
- me05.5
- Number
- 071
Grading Summary
This Sylveon ex presents as a clean, well-centered card with mostly minor corner and surface blemishes. The edge result is supported by strong overall preservation, with one notable edge issue excluded from scoring due to scan quality.
Flags
Image Quality
• 1 back-side defect ignored due to scan quality.
• 1 front-side defect ignored due to scan quality.
• Strong lighting glare and rainbow reflections across the lower half obscure part of the card surface and text area.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
Subgrades
Grade Shape
Four-axis score profile
The card is very well centered overall, with the front measuring close to even on both axes and the back still staying within a balanced range. The small back-side shift does not materially affect the strong centering result.
Corner wear is light and limited to small white nicks on the back corners, plus a very subtle, uncertain speck on the front top-right corner. The wear is present but minor and localized, consistent with a solid corners result.
Observed
The edges are strong overall, with the main back-right edge chip/notch excluded from scoring because that area was affected by image quality. Aside from that ignored region, the remaining edge evidence is limited and does not show broad perimeter wear.
Observed
Surface quality is better than average, with only a few tiny border specks/scuffs and a small front mark near the lower edge. Some front-area inspection is reduced by glare and reflections, so the surface result reflects minor visible marks rather than widespread wear.
Observed
What's holding this card back
Lowest axisCorners (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Corner Wear (minor, back).
Bringing corners up to the level of the next-weakest axis (Surface, 9.0) would be the single biggest improvement available.
Centering
Front
Back
Certificate
Verified
Sylveon ex
me05.5 · 071
