Gemi Grade Report
Battle Styles
Published June 27, 2026
This Tyranitar V shows excellent centering and clean corners, with the main limitations coming from a localized edge chip and a couple of minor front surface specks. Overall, it presents strongly with only modest visible wear.
Grade Shape
Four-axis score profile
Measured centering is very strong on both sides, with the front and back staying close to even left/right and top/bottom balance. That level of alignment supports the top centering result.
No corner wear was detected on either the front or back corner scans, so the corners present cleanly and support the top result.
The edge result is driven by a noticeable chip and interrupted cut edge at the far right end on the front edge strip scan. The wear is localized rather than widespread, which is consistent with a high but not perfect edge result.
Observed
The surface shows two small, high-confidence specks on the front art area: one in the upper green header near the Tyranitar V title and another in the upper-right background near the Single Strike logo. These are minor blemishes rather than major scratches or dents, which fits the high surface result.
Observed
Surface (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Surface Spot (minor, front).
Bringing surface up to the level of the next-weakest axis (Edges, 9.0) would be the single biggest improvement available.
Verified
Tyranitar V
swsh5 · 155