Gemi Grade Report
Black Bolt
Published June 28, 2026
This card presents very well overall, with excellent centering and clean corners. The main limitations are minor edge wear and a small back-border surface mark.
Image Quality
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
Grade Shape
Four-axis score profile
Measured centering is excellent on both sides, with the front nearly dead center and the back still very close to balanced. That level of alignment supports a top centering result.
No corner wear was detected on either the front or back corner scans. The corners present as clean and well-preserved, which is consistent with a top corner result.
The edge result is driven by minor whitening/chipping along the cut edge on the front right side. The wear is small and localized, so it fits a very strong edge grade with only slight visible compromise.
Observed
A small white speck/chip-like mark was detected on the back blue border just below the cut edge near the right side. It is minor and isolated, but it does explain a slight reduction from a perfect surface result.
Observed
Edges (9.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Edge Wear (minor, front).
Bringing edges up to the level of the next-weakest axis (Surface, 9.0) would be the single biggest improvement available.
Verified
Seismitoad
sv10.5b · 105