Gemi Grade Report
Silver Tempest
Published July 29, 2026
This copy presents as a strong example overall, with excellent centering and clean corners offset mainly by front top-edge wear and a few light surface marks. The back-side corner defect was not used in scoring because that area was affected by scan quality.
Image Quality
Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
1 back-side defect ignored due to scan quality.
Grade Shape
Four-axis score profile
The card is very well centered overall. Front measurements show a slight left-heavy bias with the vertical split essentially perfect, and the back is only mildly reversed left-to-right with near-even top-to-bottom balance, supporting a strong centering result.
The visible front corners are clean, and the one back bottom-right corner wear spot was observed but excluded from scoring because that region was affected by image-quality issues. With the assessed corners showing no meaningful wear, the corners result is supported as pristine.
Observed
Edge wear is concentrated on the front top edge, where a jagged white nick near the center-right and lighter whitening toward the right side interrupt the cut edge. The damage is modest but clearly present, which keeps the edges result below a perfect grade.
Observed
Surface condition is mostly clean, with only a couple of faint diagonal scratches in the yellow field and a tiny dark speck on the upper-left figure area. The defects are light and limited in extent, so they support a strong surface result.
Observed
Edges (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Edge Wear (moderate, front).
Bringing edges up to the level of the next-weakest axis (Centering, 9.0) would be the single biggest improvement available.
Verified
Blaziken VMAX
swsh12 · TG15