Dragonite

Measured centering is very close to even on both sides, with the front reading about 52/48 left-right and 47.9/52.1 top-bottom, and the back essentially balanced top-bottom with only a modest left-right offset. That level of alignment supports a top-tier centering result.

Corners are generally clean, with only a small white break visible along the back bottom-right corner arc. The wear is minor and isolated, which is consistent with a near-pristine corner result.

Observed

Corner Wear

Back · Minor

Edge wear is light overall, limited to a small nick/whitening on the front left cut edge, a tiny chip-like spot at the far right front edge, and a very small nick on the back bottom edge. These are minor, localized imperfections rather than broad edge degradation.

Observed

Edge Wear

Front · Minor

Edge Wear

Back · Negligible

Edge Wear

Front · Minor

The surface shows the most impact from grading-relevant wear, led by two thin diagonal scratches in the upper-right front header area and a few additional small smudges/specks on the front border plus tiny isolated specks on the back. The defects are mostly minor and scattered, but the visible scratching on the front surface explains the stronger surface deduction.

Observed

Surface Mark

Front · Minor

Surface Spot

Back · Negligible

Surface Scratch

Front · Minor

Surface Mark

Front · Minor

Surface Mark

Back · Negligible

Surface Scratch

Front · Minor

Limiting