Gemi Grade Report
SVP Black Star Promos
Published June 22, 2026
The card presents very strong centering and clean edges, with only minor corner wear noted. Surface condition is the clear limiting factor because of the visible crease/fold across the card.
Structural
Grade capped at 5 due to structural defect
Visible crease/fold across the lower center of the card.
Grade Shape
Four-axis score profile
The card is well centered on both sides, with front and back measurements staying very close to 50/50 horizontally and vertically. That level of balance supports the top centering result.
Corners are largely clean, with only a small white nick/chip noted at the back lower-left corner. The wear is minor and isolated, consistent with a strong corners result.
Observed
No edge wear was detected on the front or back edge strips, and the edge areas appear clean overall. This supports a perfect edges result.
Surface condition is heavily limited by the visible structural crease/fold across the lower center of the card, which drives the severe cap on this component. Even though other surface defects were not reported, that bent/crease evidence is enough to hold the surface grade at the capped level.
Surface (1.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
Bringing surface up to the level of the next-weakest axis (Corners, 9.0) would be the single biggest improvement available.
Verified
Pikachu with Grey Felt Hat
svp · 085