Gemi Grade Report
Stellar Crown
Published July 16, 2026
This Squirtle shows excellent centering and clean surface presentation, with the grade mainly held back by corner wear. Edge wear is minimal overall, and one back-edge nick was excluded from scoring because of scan-quality limitations.
Image Quality
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
1 back-side defect ignored due to scan quality.
Grade Shape
Four-axis score profile
Centering is excellent on both sides, with the front measuring very close to 50/50 and the back also staying within a narrow, well-balanced range. The measured offsets are small enough to fully support the top centering result.
Corner wear is present, led by moderate whitening and small chipping at the front bottom-right corner, which is the main limiter here. A smaller nick on the back bottom-right corner adds additional but lighter corner wear.
Observed
The edge surfaces are otherwise clean on the front, and no strong edge wear was detected there. A minor nick was noted on the back bottom edge, but it was in an image-quality affected region and was excluded from scoring, so the edge result reflects the remaining reliably visible edges.
Observed
No surface defects were reported on either art scan, with no scratches, dents, creases, print lines, spots, foil wear, or other anomalies identified. Despite some glare in the scan, there is not enough reliable evidence of surface damage to reduce the surface result.
Corners (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Corner Wear (moderate, front).
Bringing corners up to the level of the next-weakest axis (Centering, 10.0) would be the single biggest improvement available.
Verified
Squirtle
sv07 · 148