Gemi Grade Report
Prismatic Evolutions
Published August 22, 2026
This card shows strong centering and very clean corners, with only limited edge wear. The main surface limitation is the front crease/nick, while some back-side defects were excluded from scoring due to image-quality issues.
Image Quality
3 back-side defects ignored due to scan quality.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
• Parts of this scan are hard to inspect. Glare, overexposure, or low detail may reduce grading confidence.
Grade Shape
Four-axis score profile
Centering is strong on both sides, with the front nearly balanced left-to-right and only a modest top-heavy bias. The back is similarly close to centered horizontally, with the same moderate top-to-bottom shift still within a clean overall presentation.
The corners present very clean overall, which supports a top-end corners result. A severe-looking back top-right corner defect was observed, but it sat in an image-quality affected region and was excluded from scoring because the scan there was unreliable.
Observed
Edge wear is limited to a small chip/whitening point at the front far-right cut edge, with no broader edge damage evident on the clearer portions of the card. A second back-edge whitening area was noted, but it was in a scan-quality affected region and was excluded from the grade.
Observed
The surface is held back by a visible crease/nick on the front silver divider line, which is the most meaningful defect in the scan set. A faint back speck is also present, while another back-side speck near the upper-left was ignored because it fell in a glare-affected area.
Observed
Surface (8.0) is the lowest of the four axes. It's the main thing keeping this card from a higher grade.
The limiting defect is Surface Crease (moderate, front).
Bringing surface up to the level of the next-weakest axis (Centering, 9.0) would be the single biggest improvement available.
Verified
Suicune
sv08.5 · 024